GEARENCH(PETOL)SURGRIP扭力扳手式摩擦钳

GEARENCH(PETOL)SURGRIP扭力扳手式摩擦钳
品牌：GEARENCH
类型：扭力扳手
产品描述：【吉伦奇】供应GEARENCH扭力扳手,手动扭力扳手,PETOL扭力扳手.

3/4" drive torque wrench handle fits directly into torque wrench head.
3/4" 驱动扭矩扳手手柄直接安装到扭矩扳手头中。
An adaptor is required when using a 1/2" drive torque wrench handle.
使用 1/2" 驱动扭矩扳手手柄时需要一个适配器。
注意：扳手头、适配器和扭矩扳手手柄必须单独订购。

带驱动适配器和扭矩扳手手柄的扳手头。

PETOLSURGRIP扭矩扳手在组装泵零件时提供精确的扭矩测量单位：ft.-lbs.。每个扳手都经过钻孔，仅通过摩擦就可以抓住特定的O.D.，并且不会损坏零件的表面。

这些扳手具有petol-surgrip摩擦钳的特点，可与任何1/2“或3/4”驱动“卡扣式”扭矩扳手手柄一起使用。

手柄选型表：

PART NO.ITEM DESCRIPTIONDRIVE SIZELENGTHWEIGHTMAXIMUM WORKING LOAD

ZT250MTorque Wrench Handle1/2"23-1/2"4-3/8 lbs.250 ft.-lbs.

ZT600MTorque Wrench Handle3/4"40"14 lbs.600 ft.-lbs.

ZT1000MTorque Wrench Handle1"70"38 lbs.1000 ft.-lbs.

ZT50A1/2" Adaptor3/4"n/a4 ozs.n/a

ZT51A1" Adaptor3/4"n/a1-5/8 lbs.n/a

NOTE: If using ZT600M Torque Handle with ZT1 Wrench Heads, DO NOT EXCEED 500 ft.-lbs.
注意：如果将 ZT600M 扭矩手柄与 ZT1 扳手头一起使用，请勿超过 500 英尺磅。

扳手头选型表：

PART NO.O.D.GRIPPING WIDTHWEIGHT

ZT1:0.625T0.625"2.25"6-1/2 lbs.

ZT1:0.688T0.688"2.25"6-1/2 lbs.

ZT1:0.750T0.750"2.25"6-1/2 lbs.

ZT1:0.812T0.812"2.25"6-1/2 lbs.

ZT1:0.875T0.875"2.25"6-1/2 lbs.

ZT1:0.938T0.938"2.25"6-1/2 lbs.

ZT1:1.000T1.000"2.25"6-1/2 lbs.

ZT1:1.062T1.062"2.25"6-1/2 lbs.

ZT1:1.125T1.125"2.25"6-1/2 lbs.

ZT1:1.188T1.188"2.25"6-1/2 lbs.

ZT1:1.250T1.250"2.25"6-1/2 lbs.

NOTE: Maximum Working Load for ZT1 Wrench Heads is 500 ft.-lbs.

ZT2:1.312T1.312"2.50"9-1/4 lbs.

ZT2:1.375T1.375"2.50"9-1/4 lbs.

ZT2:1.438T1.438"2.50"9-1/4 lbs.

ZT2:1.500T1.500"2.50"9-1/4 lbs.

ZT2:1.625T1.625"2.50"9-1/4 lbs.

ZT2:1.688T1.688"2.50"9-1/4 lbs.

ZT2:1.750T1.750"2.50"9-1/4 lbs.

ZT3:1.625T1.625"2.50"10-1/2 lbs.

ZT3:1.750T1.750"2.50"10-1/2 lbs.

ZT3:1.812T1.812"2.50"10-1/2 lbs.

ZT3:1.875T1.875"2.50"10-1/2 lbs.

ZT3:1.938T1.938"2.50"10-1/2 lbs.

ZT3:1.960T1.960"2.50"10-1/2 lbs.

ZT3:2.000T2.000"2.50"10-1/2 lbs.

ZT3:2.062T2.062"2.50"10-1/2 lbs.

ZT3:2.125T2.125"2.50"10-1/2 lbs.

ZT3:2.188T2.188"2.50"10-1/2 lbs.

ZT3:2.250T2.250"2.50"10-1/2 lbs.

ZT3:2.312T2.312"2.50"10-1/2 lbs.

ZT3:2.375T2.375"2.50"10-1/2 lbs.

ZT4:2.375T2.375"3.00"17-1/8 lbs.

ZT4:2.500T2.500"3.00"17-1/8 lbs.

ZT4:2.625T2.625"3.00"17-1/8 lbs.

ZT4:2.688T2.688"3.00"17-1/8 lbs.

ZT4:2.750T2.750"3.00"17-1/8 lbs.

ZT4:2.812T2.812"3.00"17-1/8 lbs.

ZT4:2.875T2.875"3.00"17-1/8 lbs.

ZT5:3.000T3.000"3.50"24 lbs.

ZT5:3.125T3.125"3.50"24 lbs.

ZT5:3.250T3.250"3.50"24 lbs.

ZT5:3.375T3.375"3.50"24 lbs.

ZT5:3.500T3.500"3.50"24 lbs.

ZT5:3.625T3.625"3.50"24 lbs.

ZT5:3.688T3.688"3.50"24 lbs.

ZT5:3.750T3.750"3.50"24 lbs.

ZT5:3.875T3.875"3.50"24 lbs.

ZT5:4.000T4.000"3.50"24 lbs.

Special O.D. sizes available upon request. Special sizes are non-returnable.
特殊外径 可根据要求提供尺寸。 特殊尺寸不可退换。