CJME2025年3期目录

Intelligent Maintenance and Health Management

Quantitative Detection of Micro Hole Wall Roughness in PCBs Based on Improved U-Net Model

基于U-Net改进模型的印制电路板微孔孔壁粗糙度定量检测方法研究

作者：

Lijuan Zheng, Yonghao Li, Zhuangzhuang Sun, Yangquan Luo, Ying Xu, Jun Wang, Chengyong Wang and Xin Wei

引用：

Zheng, L., Li, Y., Sun, Z. et al. Quantitative Detection of Micro Hole Wall Roughness in PCBs Based on Improved U-Net Model. Chin. J. Mech. Eng. 38, 76 (2025). https://doi.org/10.1186/s10033-025-01245-3

Fault Detection and Fault-tolerant Control based on Bi-LSTM Network and SPRT for Aircraft Braking System

基于双向长短期记忆网络与序贯概率比检验的飞机刹车系统故障检测与容错控制

作者：

Renjie Li, Yaoxing Shang, Jinglin Cai, Xiaochao Liu, Lingdong Geng, Pengyuan Qi and Zongxia Jiao

引用：

Li, R., Shang, Y., Cai, J. et al. Fault Detection and Fault-Tolerant Control Based on Bi-LSTM Network and SPRT for Aircraft Braking System. Chin. J. Mech. Eng.38, 64 (2025). https://doi.org/10.1186/s10033-025-01219-5

Machining Manufacturing

Geometric Accuracy Design of High Performance CNC Machine Tools: Modeling, Analysis, and Optimization

高性能数控机床的几何精度设计：建模、分析与优化

作者：

Liping Wang, Jihui Han, Zihan Tang, Yun Zhang, Dong Wang & Xuekun Li

引用：

Wang, L., Han, J., Tang, Z. et al. Geometric Accuracy Design of High Performance CNC Machine Tools: Modeling, Analysis, and Optimization. Chin. J. Mech. Eng. 38, 87 (2025). https://doi.org/10.1186/s10033-025-01258-y

Measurement and characterization of micro corner-cube reflectors array using coherent denoising interference and physical model-based neural network

基于光学传递函数的微结构干涉测量相干去噪与轮廓重建

作者：

Xinlan Tang, Lingbao Kong, Zhenzhen Ding, Yuhan Wang, Bo Wang, Huixin Song & Yanwen Shen

引用：

Tang, X., Kong, L., Ding, Z. et al. Measurement and Characterization of Micro Corner-Cube Reflectors Array Using Coherent Denoising Interference and Physical Model-Based Neural Network. Chin. J. Mech. Eng. 38, 93 (2025). https://doi.org/10.1186/s10033-025-01260-4

Material Deformation and Damage Mechanism Based on In-Situ Plasma-Assisted Nanoscratch Test of Single Crystal Silicon

基于等离子体原位辅助单晶硅纳米划痕试验的材料变形和损伤机理

作者：

Ziheng Wang, Zhenjing Duan, Shuaishuai Wang, Yuheng Li, Jiyu Liu, Jinlong Song and Xin Liu

引用：

Wang, Z., Duan, Z., Wang, S. et al. Material Deformation and Damage Mechanism Based on In-Situ Plasma-Assisted Nanoscratch Test of Single Crystal Silicon. Chin. J. Mech. Eng. 38, 67 (2025). https://doi.org/10.1186/s10033-025-01238-2

Geometric Error Identification and Compensation of Swiveling Axes based on Additional Rotational Rigid Body Motion Constraints

基于附加旋转刚体运动约束的回转轴几何误差识别与补偿

作者：

Jun Zha and Xiaofei Peng

引用：

Zha, J., Peng, X. Geometric Error Identification and Compensation of Swiveling Axes Based on Additional Rotational Rigid Body Motion Constraints. Chin. J. Mech. Eng. 38, 89 (2025). https://doi.org/10.1186/s10033-025-01221-x

Performance analysis and prediction of rock cutting with a rotating abrasive water jet

基于旋转磨料水射流的岩石切割性能分析与预测

作者：

Hongxiang Jiang, Huihe Zhao, Xiaodi Zhang, Zijian Wu and Mingjin Zhao

引用：

Jiang, H., Zhao, H., Zhang, X. et al. Performance Analysis and Prediction of Rock Cutting with a Rotating Abrasive Water Jet. Chin. J. Mech. Eng. 38, 69 (2025). https://doi.org/10.1186/s10033-025-01250-6

An accurate modeling approach of contact stiffness in milling tool-holder interface using fractal theory

基于分形理论的铣刀-刀柄界面接触刚度精确建模方法

作者：

Yawei Zheng, Zhengcai Zhao, Yang Zhou and Jiuhua Xu

引用：

Zheng, Y., Zhao, Z., Zhou, Y. et al. An Accurate Modeling Approach of Contact Stiffness in Milling Tool-holder Interface Using Fractal Theory. Chin. J. Mech. Eng. 38, 82 (2025). https://doi.org/10.1186/s10033-025-01236-4

Theoretical and experimental investigations on thickness uniformity in double-sided lapping

双面研磨中工件间厚度均匀性的理论和实验研究

作者：

Zhuolin Cai, Zhe Yang, Bo Pan, Jiale Lian, Lianlin Wang, Sergei Pronkevich and Jiang Guo

引用：

Cai, Z., Yang, Z., Pan, B. et al. Theoretical and Experimental Investigations on Thickness Uniformity in Double-sided Lapping. Chin. J. Mech. Eng. 38, 83 (2025). https://doi.org/10.1186/s10033-025-01234-6

Wear mechanism of cutting tools in multi-dimensional configuration cutterhead shield

多维构型刀盘盾构切削刀具磨损机理

作者：

Hua Jiang, Ao Zhang, Yusheng Jiang, Jiachen Zhu and Xiaoyan Zhang

引用：

Jiang, H., Zhang, A., Jiang, Y. et al. Wear Mechanism of Cutting Tools in Multi-dimensional Configuration Cutterhead Shield. Chin. J. Mech. Eng. 38, 80 (2025). https://doi.org/10.1186/s10033-025-01248-0

Research Progress of Abrasive Groups Ordered Grinding Wheels

磨料群有序排布砂轮的研究进展

作者：

Ye Guo, Bing Chen, Zihao Liu, Shiwei Sun, Guoyue Liu and Bing Guo

引用：

Guo, Y., Chen, B., Liu, Z. et al. Research Progress of Abrasive Groups Ordered Grinding Wheels. Chin. J. Mech. Eng. 38, 53 (2025). https://doi.org/10.1186/s10033-025-01214-w

Manufacturing Systems and Intelligence

Effects of different representations for solving integrated production and transportation scheduling problem

不同解表示方法对集成生产与运输调度问题求解的影响

作者：

Youjie Yao, Qingzheng Wang, Cuiyu Wang and Xinyu Li

引用：

Yao, Y., Wang, Q., Wang, C. et al. Effects of Different Representations for Solving Integrated Production and Transportation Scheduling Problem. Chin. J. Mech. Eng. 38, 85 (2025). https://doi.org/10.1186/s10033-025-01247-1

Design, analysis and prototype testing of a non-explosive self-deploying wing actuated by NiTi shape memory alloy wires

基于NiTi形状记忆合金丝驱动的非火工弹翼自展开机构的设计、分析与样机测试

作者：

Bin Huang, Jun Wang, Xiaojun Gu, Jihong Zhu and Weihong Zhang

引用：

Huang, B., Wang, J., Gu, X. et al. Design, Analysis and Prototype Testing of a Non-explosive Self-deploying Wing Actuated by NiTi Shape Memory Alloy Wires. Chin. J. Mech. Eng. 38, 68 (2025). https://doi.org/10.1186/s10033-025-01230-w

Materials Processing Engineering

Experiments and Multiscale Simulation on Enhancement Mechanism of Zirconium Alloy Microstructure and Properties by Laser Shock Peening

激光冲击强化锆合金组织性能增强机制的实验与多尺度模拟研究

作者：

Zhiyuan Liu, Feng Pan, Xueran Deng, Yujie Zhu, Fei Fan, Du Wang and Qiao Xu

引用：

Liu, Z., Pan, F., Deng, X. et al. Experiments and Multiscale Simulation on Enhancement Mechanism of Zirconium Alloy Microstructure and Properties by Laser Shock Peening. Chin. J. Mech. Eng. 38, 74 (2025). https://doi.org/10.1186/s10033-025-01246-2

Research on Material Flow Law and Control for Diffluence Upsetting-Extrusion Forming of Large-Scale Magnesium Alloy Complex Housing

大型镁合金复杂壳体分流式镦挤成形的材料流动规律与控制方法研究

作者：

Ang Wu, Zhimin Zhang, Yong Xue and Jian Xu

引用：

Wu, A., Zhang, Z., Xue, Y. et al. Research on Material Flow Law and Control for Diffluence Upsetting-Extrusion Forming of Large-Scale Magnesium Alloy Complex Housing. Chin. J. Mech. Eng. 38, 90 (2025). https://doi.org/10.1186/s10033-025-01244-4

Numerical Simulation Study on Residual Stress in Repair Welding of a CrMo Steel High-Temperature Pressure Pipeline Weldment Under Extended Service

长期服役CrMo钢高温压力管道焊件补焊残余应力的数值模拟研究

作者：

Bin Yang, Minghao Xiu, Wenchun Jiang and Wei Peng

引用：

Yang, B., Xiu, M., Jiang, W. et al. Numerical Simulation Study on Residual Stress in Repair Welding of a CrMo Steel High-Temperature Pressure Pipeline Weldment Under Extended Service. Chin. J. Mech. Eng. 38, 73 (2025). https://doi.org/10.1186/s10033-025-01240-8

Mechanical Tribology and Surface Technology

In-situ particulate-reinforced Al matrix composites: Effect of the synergistic mechanism of ZrB2 and Al3Zr on tribological behavioy

原位颗粒增强铝基复合材料ZrB2和Al3Zr的协同机制对摩擦学行为的影响

作者：

Feng Wang, Hui Li, Xiaolong Zhang, Lei Jiao, Wei He, Xudong Han and Shcheretskyi Volodymyr

引用：

Wang, F., Li, H., Zhang, X. et al. In-situ Particulate-Reinforced Al Matrix Composites: Effect of the Synergistic Mechanism of ZrB2 and Al3Zr on Tribological Behavior. Chin. J. Mech. Eng. 38, 81 (2025). https://doi.org/10.1186/s10033-025-01243-5

Energy harvesting of flow induced vibration enhanced by bionic non-smooth surfaces

基于仿生非光滑表面的流致振动能量收集增强研究

作者：

Jiawei Wang, Bowen Tang, Hewei Yang, Guorui Zhu and Wei Tan

引用：

Wang, J., Tang, B., Yang, H. et al. Energy Harvesting of Flow Induced Vibration Enhanced by Bionic Non-Smooth Surfaces. Chin. J. Mech. Eng. 38, 79 (2025). https://doi.org/10.1186/s10033-025-01200-2

Study of Adhesion Force of Typical Space Solid Lubricant Films Based on AFM Technology

基于原子力显微镜技术的典型空间固体润滑薄膜黏附力研究

作者：

Haoyu Wang, Shuying Chen, Qingwei Huang, Shaosong Li, Guozheng Ma, Haichao Zhao, Haidou Wang and Zhiying Ren

引用：

Wang, H., Chen, S., Huang, Q. et al. Study of Adhesion Force of Typical Space Solid Lubricant Films Based on AFM Technology. Chin. J. Mech. Eng. 38, 84 (2025). https://doi.org/10.1186/s10033-025-01251-5

Mechanism and Robotics

A Ground Mobile RPRPS Mechanism

一种地面移动式RPRPS机构

作者：

Xingjie Liu, Chao Liu, Ziqian Wang, Jingyun Lv and Yanan Yao

引用：

Liu, X., Liu, C., Wang, Z. et al. A Ground Mobile RPRPS Mechanism. Chin. J. Mech. Eng. 38, 86 (2025). https://doi.org/10.1186/s10033-025-01228-4

Inspired by the Adhesive Ability of Drosera and the Stress Envelope Effect Rescue Manipulator

基于茅膏菜黏附能力与应力包络效应的救援机械手设计研究

作者：

Yanzhi Zhao, Haibo Yu, Changlei Pei, Maoshi Lu and Shijun Huang

引用：

Zhao, Y., Yu, H., Pei, C. et al. Inspired by the Adhesive Ability of Drosera and the Stress Envelope Effect Rescue Manipulator. Chin. J. Mech. Eng. 38, 94 (2025). https://doi.org/10.1186/s10033-025-01242-6

CGA-Based approach to forward kinematics of parallel mechanisms with the 3-RE structure

基于共形几何代数的3-RE结构并联机构正向运动学求解方法

作者：

Duanling Li, Yuankai Zhang, Ying Zhang, Zhonghai Zhang, Longjie Fan, Xiao Su and Shuaimin Gao

引用：

Li, D., Zhang, Y., Zhang, Y. et al. CGA-Based Approach to Forward Kinematics of Parallel Mechanisms with the 3-RE Structure. Chin. J. Mech. Eng. 38, 62 (2025). https://doi.org/10.1186/s10033-025-01223-9

New Energy and Intelligent

Connected Vehicles

FS-DRL: Fine-Grained Scheduling of Autonomous Vehicles at Non-Signalized Intersections via Dual Reinforced Learning

FS-DRT：基于双重强化学习的无信号交叉口智能车辆精细化调度

作者：

Ning Sun, Weihao Wu, Guangbing Xiao and Guodong Yin

引用：

Sun, N., Wu, W., Xiao, G. et al. FS-DRL: Fine-Grained Scheduling of Autonomous Vehicles at Non-Signalized Intersections via Dual Reinforced Learning. Chin. J. Mech. Eng. 38, 71 (2025). https://doi.org/10.1186/s10033-025-01203-z

Multi-Objective Parallel Human-machine Steering Coordination Control Strategy of Intelligent Vehicles Path Tracking Based on Deep Reinforcement Learning

基于深度强化学习的智能汽车路径跟踪并联式人机转向多目标协同策略

作者：

Hongbo Wang, Lizhao Feng, Shaohua Li, Wuwei Chen and Juntao Zhou

引用：

Wang, H., Feng, L., Li, S. et al. Multi-Objective Parallel Human-machine Steering Coordination Control Strategy of Intelligent Vehicles Path Tracking Based on Deep Reinforcement Learning. Chin. J. Mech. Eng. 38, 63 (2025). https://doi.org/10.1186/s10033-025-01207-9

Performance Analysis and Multi-Objective Optimization of Functional Gradient Honeycomb Non-pneumatic Tires

功能梯度蜂窝非充气轮胎的性能分析及多目标优化

作者：

Haichao Zhou, Haifeng Zhou, Haoze Ren, Zhou Zheng and Guolin Wang

引用：

Zhou, H., Zhou, H., Ren, H. et al. Performance Analysis and Multi-Objective Optimization of Functional Gradient Honeycomb Non-pneumatic Tires. Chin. J. Mech. Eng. 38, 78 (2025). https://doi.org/10.1186/s10033-025-01235-5

Rail Transit Vehicle Systems

Revolutionizing rail transportation: Unleashing titanium alloys for enhanced performance, safety, and sustainability

革新轨道交通：钛合金在提升性能、安全性与可持续性方面的突破性应用

作者：

Zhe Zhang, Bing Yang and Shoune Xiao

引用：

Zhang, Z., Yang, B. & Xiao, S. Revolutionizing Rail Transportation: Unleashing Titanium Alloys for Enhanced Performance, Safety, and Sustainability. Chin. J. Mech. Eng. 38, 72 (2025). https://doi.org/10.1186/s10033-025-01229-3

Multi-Objective Optimization Approach for Achieving Target Profile in Rail Grinding of Worn Rails

磨耗钢轨打磨目标廓形的多目标优化方法

作者：

Zhiwei Wu, Wengang Fan, Jiang Li, Zhiao Liu and Jiating Yang

引用：

Wu, Z., Fan, W., Li, J. et al. Multi-Objective Optimization Approach for Achieving Target Profile in Rail Grinding of Worn Rails. Chin. J. Mech. Eng. 38, 60 (2025). https://doi.org/10.1186/s10033-025-01208-8

Transmission and Drive

Performance Analysis of Open–Closed Circuit Integrated Pump-Valve Collaborative Drive Multi-Actuator System

开闭式回路集成泵阀协同驱动多执行器系统的性能分析

作者：

Tao Liang, Long Quan, Lei Ge and Lianpeng Xia

引用：

Liang, T., Quan, L., Ge, L. et al. Performance Analysis of Open–Closed Circuit Integrated Pump-Valve Collaborative Drive Multi-Actuator System. Chin. J. Mech. Eng. 38, 104 (2025). https://doi.org/10.1186/s10033-025-01277-9

Investigation of a Low-Power-Consumption and Self-Retaining Micro Solenoid Valve for Thermal Management Systems

面向热管理系统的低功耗自保持微型电磁阀研究

作者：

Jing Yao, Shuai Yang, Liu Yang, Qingxin Meng, Chao Ai and Xiangdong Kong

引用：

Yao, J., Yang, S., Yang, L. et al. Investigation of a Low-Power-Consumption and Self-Retaining Micro Solenoid Valve for Thermal Management Systems. Chin. J. Mech. Eng. 38, 59 (2025). https://doi.org/10.1186/s10033-025-01227-5

Design and Performance Study of an Automatic Compensation Wear High-Pressure Rotary Sealing Device

自动补偿磨损式高压旋转密封装置的设计与性能研究

作者：

Hongxiang Jiang, Huihe Zhao, Xiaodi Zhang, Hongsheng Li and Chao Xia

引用：

Jiang, H., Zhao, H., Zhang, X. et al. Design and Performance Study of an Automatic Compensation Wear High-Pressure Rotary Sealing Device. Chin. J. Mech. Eng. 38, 77 (2025). https://doi.org/10.1186/s10033-025-01249-z

Numerical Simulation and Improvement of Fiber Thrower Using Multi-Domain Coupling Schemes

基于多域耦合方案的纤维抛洒装置数值模拟与改进研究

作者：

Xu Qian, Su Yang and Chunbao Liu

引用：

Qian, X., Yang, S. & Liu, C. Numerical Simulation and Improvement of Fiber Thrower Using Multi-Domain Coupling Schemes. Chin. J. Mech. Eng. 38, 50 (2025). https://doi.org/10.1186/s10033-025-01213-x

Analysis of Leakage Effects on the Outlet Flow Characteristics of a Two-dimensional Piston Pump

二维活塞泵泄漏效应对出口流量特性的影响分析

作者：

Yu Huang, Hanyu Xu, Wei Shao, Chuan Ding and Li Liu

引用：

Huang, Y., Xu, H., Shao, W. et al. Analysis of Leakage Effects on Outlet Flow Characteristics of a Two-dimensional Piston Pump. Chin. J. Mech. Eng. 38, 92 (2025). https://doi.org/10.1186/s10033-025-01265-z

Investigation on a novel tractive-magnetic-coupling and its application on 2D electro-hydraulic proportional flow valve

新型吸力型磁悬浮联轴及其在二维电液比例流量阀上的应用研究

作者：

Hao Xu, Bin Meng, Guanzheng Yang, Sheng Li and Jian Ruan

引用：

Xu, H., Meng, B., Yang, G. et al. Investigation on a Novel Tractive-Magnetic-Coupling and its Application on 2D Electro-Hydraulic Proportional Flow Valve. Chin. J. Mech. Eng. 38, 109 (2025). https://doi.org/10.1186/s10033-025-01226-6

责任编辑：恽海艳

责任校对：向映姣

审 核：张 彤

JME学院简介

JME学院是由《机械工程学报》编辑部2018年创建，以关注、陪伴青年学者成长为宗旨，努力探索学术传播服务新模式。

欢迎各位老师扫码添加小助理-暖暖为好友，由小助理拉入JME学院官方群！

欢迎关注JME学院视频号~

寻觅合作伙伴

有一种合作叫做真诚，有一种发展可以无限，有一种伙伴可以互利共赢，愿我们合作起来流连忘返，发展起来前景可观。关于论文推荐、团队介绍、图书出版、学术直播、招聘信息、会议推广等，请与我们联系。

感谢关注我们！我们《机械工程学报》编辑部将努力为您打造一个有态度、有深度、有温度的学术媒体！

版权声明：

本文为《机械工程学报》编辑部原创内容，欢迎转载，请联系授权！

在公众号后台留言需要转载的文章题目及要转载的公众号ID以获取授权!

微信投稿、转载等：

联系人：暖暖

电话：010-88379909

E-mail：jme@cmes.org

网 址：http://www.cjmenet.com.cn

官方微信号：jmewechat