软成型封边机KB-399R丨一机掌控，五种造型自由切换

来源：市场资讯

（来源：KDT极东机械）

极东机械软成型直边一体封边机【KB-399R】智能操控，一键切换异型、直边封边，实现效率和品质的最优化。可满足全圆弧、斜直边、鸭嘴圆弧、斜圆弧和直边多种工艺，实现效率和品质的最优化。

KDT Soft-Forming Edge Bander [KB-399R]Equipped with smart control system, capable of one-touch switch between straight and irregular edges. Support mutiple edge profiles, including full arc edge, beveled straight edge, duckbill arc edge, beveled arc edge, and straight edge, ensuring both efficiency and quality.

核心亮点 HIGHLIGHTS

履带压料机构

Belt-type Pressure Beam

压紧接触面积大，确保木板高速输送的稳定性、提升封边品质。

A large contact area on the panel ensures stable conveyance with high speed, improving edging quality.

压梁自动定位

Pressure beam positioning system

快速切换加工不同厚度的板件，减少调机时间，提高效率。

Quick adjustment of pressure beam height according to panel thickness reduces setup time and increases efficiency.

伺服成型铣刀机构

Servo profile milling unit

配备2组高功率铣刀电机和4组不同轮廓的正反刃成型铣刀。4组伺服电机控制刀刃高度和进退位置，保证造型精度。

Equipped with dual 7.5kW motors and 4 sets of forward and reverse cutters for processing different edge profiles, 4 servo motors control the cutter height and forward/backward movement,ensuring high processing accuracy.

预铣机构

Pre-milling Unit

直边预铣，异型伺服成型铣刀一键切换。正反刃预铣，封第三、四边时不崩带。

Support straight edge pre-milling and servo profile milling of irregular edges. Forward & reverse cutters prevent edge chipping during edge banding on the 3rd and 4th sides.

预热装置

Pre-Heating Unit

预热板件，提升板材与边带的粘合效果。

Pre-heat the panel to improve adhesion with the tape.

封边带刻槽

Edge Tape Grooving

配备伺服电机联动调节封边带刻槽高度，以及计数器调节封边带刻槽深度，直观便捷。

Equipped with a servo motor for synchronized adjustment of grooving height and a counter for depth adjustment.

异型伺服成型压贴

Servo-controlled profile pressing

伺服控制一键切换板厚，多组烤灯+热风枪，边带软化更充分。

Servo control enables one-touch switch between different edge profiles. Multiple heating lamps and hot air guns ensure the tape is fully softened.

直边涂胶压贴

Straight Edge Gluing & Pressing

直边涂胶压贴机构，方便调节，压紧封边条，保证压贴效果。

Straight edge gluing & pressing units feature easy adjustment. The pressing unit firmly presses the tape to improve adhesion.

卓越配置Configurations

齐头机构

End cutting

通过精密的直线导轨运动，快速切断板材前后多余边带,确保切断面平整光滑。

Motions along the precision linear guides, quickly cut off the excess edge at front and rear of the panel to ensure a smooth cut surface.

异型、直边精修机构

Straight & irregular edge fine trimming unit

将突出于木板上下表面多余边带切除，使封边带上下边缘与木板的上下表面平齐。

Remove the excess tape from surfaces of the board, make sure edging is flush.

异型直边一体跟踪机构

Straight & irregular edge corner rounding unit

柔性模式可减少对异型板材冲击，实现鸭嘴、斜直边、斜圆弧、全圆弧等形状的仿型修边工艺。

Flexible mode reduces impact on special-shaped panels and enables profiling trimming processes for various contours.

异型、直边刮边机构

Straight & irregular edge scraping unit

消除修边非直线运动切削过程引起的波纹痕迹，使板材上下部分更加光滑整洁。

Trim off the tools marks, ensuring the best edging quality.

抛光机构

Buffing Unit

清除板件上下面的余胶和碎屑。

Removes residual glue and debris on top and bottom of panels.

视频鉴赏Video Analysis

技术参数Technical parameters