江苏
316S13 机械性能
316S13板，棒，管，钢带，线材，锻件，锻管，锻板，锻棒，圆棒，板材，薄板，无缝管，焊管，圆钢，丝材
牌号
316S13
BS 970-3-1991
对应标准
机械及相关工程用钢的规格第3部分:一般工程用优质钢棒
Specification for wrought steel for machanical and allied engineering purposes part 3:bright bars for general engineering purposes
归类
奥氏体不锈钢
性能
强度耐腐蚀低温韧性冲击韧性锻压性
奥氏体不锈钢
316S13（1.4435）不锈钢是一种奥氏体高耐蚀材料。根据 EN 规范，该等级写为 316S13（1.4435）或 316LMo 或 X2CrNiMo18-14-3。316S13（1.4435）不锈钢通常与 316L (1.4404) 不锈钢等级相比。316S13（1.4435）材料具有更高的铬、镍和钼含量，由于这些元素，它比 316L (1.4404) 级更耐腐蚀。316S13（1.4435）在316S13（1.4435）等级没有磁性。该等级用于腐蚀性环境，如果 316L 等级不够，316S13（1.4435）不锈钢可能是一个很好的替代材料。1.4435材料通常用于石化工业、制药工业、化工厂和汽车工业。该等级不是耐热等级，不适合在高温下使用该等级。
316S13 (1.4435) stainless steel is an austenitic high corrosion resistant material. According to the EN specification, the grade is written as 316S13 (1.4435) or 316LMo or X2CrNiMo18-14-3. 316S13 (1.4435) stainless steel is usually compared with 316L (1.4404) stainless steel grade. 316S13 (1.4435) material has higher content of chromium, nickel and molybdenum. Because of these elements, it is more corrosion resistant than 316L (1.4404). 316S13 (1.4435) has no magnetism in 316S13 (1.4435). This grade is used in corrosive environments. If the 316L grade is not enough, 316S13 (1.4435) stainless steel may be a good substitute. 1.4435 Materials are commonly used in petrochemical industry, pharmaceutical industry, chemical plant and automobile industry. This grade is not heat resistant and is not suitable for use at high temperatures.
316S13 化学元素成分含量(%)
316S13 机械性能
316S13（1.4435）标准：
EN 10088-2：2005 不锈钢。一般用途耐腐蚀钢薄板/板和带材交货技术条件
EN 10088-3：2005 不锈钢。一般用途耐蚀钢半成品、棒材、线材、型材和光亮产品交货技术条件
EN 10028-7: 2007 压力用钢制成的扁平产品。不锈钢
EN 10222-5: 2000 压力用钢锻件。马氏体、奥氏体和奥氏体-铁素体不锈钢
EN 10216-5: 2014 压力用无缝钢管。技术交货条件。不锈钢管
EN 10217-7: 2005 压力用焊接钢管。不锈钢管
EN 10296-2: 2005 机械和通用工程用焊接圆形钢管。不锈钢。技术交货条件
EN 10253-3: 2008 对焊管件。无特殊检验要求的锻制奥氏体和奥氏体-铁素体（双相）不锈钢
EN 10253-4: 2008 对焊管件。具有特定检验要求的锻制奥氏体和奥氏体-铁素体（双相）不锈钢
EN 10272: 2007 压力用不锈钢棒
EN 10250-4: 2000 一般工程用途的开放式钢模锻件。不锈钢
EN 10297-2: 2005 机械和通用工程用无缝圆钢管。不锈钢。技术交货条件
EN 10088-1：2005 不锈钢。不锈钢一览
EN 10088-5：2009 不锈钢。建筑用耐腐蚀钢棒材、线材、型材和光亮产品交货技术条件
EN 10088-4：2009 不锈钢。建筑用耐腐蚀钢薄板/板材和带材的交货技术条件
316S13（1.4435）物理性能：
- ①密度密度(20℃)/kg/dm3:"8，
- ⑩磁性:无。
- ⑴交货状态：棒材固溶处理，板材固溶酸洗，
- ⑵抗拉强度（RM/MPa）：-，
- ⑶延伸强度（Rp0.2/MPa）：，
- ⑷伸长率A/%：-，
- ⑸断面收缩率（Z/%）：-。
316S13 (1.4435) standard:
EN 10088-2:2005 Stainless steel. Technical delivery conditions for corrosion resistant steel sheet/plate and strip for general purposes
EN 10088-3:2005 Stainless steel. Technical delivery conditions for semi-finished products, bars, wires, sections and bright products of corrosion resistant steel for general purposes
EN 10028-7: 2007 Flat products made of steel for pressure. stainless steel
EN 10222-5: 2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic ferritic stainless steels
EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless steel pipe
EN 10217-7: 2005 Welded steel tubes for pressure purposes. Stainless steel pipe
EN 10296-2: 2005 Welded circular steel tubes for mechanical and general engineering purposes. stainless steel. Technical delivery conditions
EN 10253-3: 2008 Butt welded pipe fittings. Wrought austenitic and austenitic ferritic (duplex) stainless steels without special inspection requirements
EN 10253-4: 2008 Butt welded pipe fittings. Wrought austenitic and austenitic ferritic (duplex) stainless steels with specific inspection requirements
EN 10272: 2007 Stainless steel bars for pressure
EN 10250-4: 2000 Open die forgings for general engineering purposes. stainless steel
EN 10297-2: 2005 Seamless round steel tubes for mechanical and general engineering. stainless steel. Technical delivery conditions
EN 10088-1:2005 Stainless steel. Stainless steel list
EN 10,088-5:2009 Stainless steel. Technical delivery conditions for corrosion resistant steel bars, wires, sections and bright products for building
EN 10088-4:2009 Stainless steel. Technical delivery conditions for corrosion resistant steel sheet/plate and strip for building
316S13 (1.4435) Physical property:
① Density density (20 ℃)/kg/dm3: "8,
⑩ Magnetism: None.
⑴ Delivery status: solution treatment of bar, solution pickling of plate,
⑵ Tensile strength (RM/MPa): -,
(3) Tensile strength (Rp0.2/MPa):,
(4) Elongation A/%: -,
(5) Reduction of area (Z/%): -.
特别声明：以上内容(如有图片或视频亦包括在内)为自媒体平台“网易号”用户上传并发布，本平台仅提供信息存储服务。
Notice: The content above (including the pictures and videos if any) is uploaded and posted by a user of NetEase Hao, which is a social media platform and only provides information storage services.
