U901 PI聚酰亚胺粘接UV胶 产品介绍1
产品介绍1.1 产品概述1.2 产品定位2 产品特点3 规格参数4 应用场景5 使用方法5.1 固化用 UV 灯建议5.2 操作步骤5.3 注意事项6 包装规格7 储存与注意事项8 企业信息
![]()
TADHE ®
U901 PI聚酰亚胺粘接UV胶
产品介绍 / Product Introduction
(PI) POLYIMIDE BONDING UV ADHESIVE
深圳市泰达克电子材料有限公司
SHENZHEN TADHE MATERIALS CO.,LTD
官方网站 / Official Website: www.taidake.com
(PI) POLYIMIDE BONDING UV ADHESIVE
1 Product Introduction
1.1 Product Overview
U901 为泰达克 TADHE® 品牌 PI 聚酰亚胺粘接 UV 胶,是专为 PI(聚酰亚胺)、CPI、PA(聚酰胺)等难粘塑料基材开发的改性丙烯酸 UV 树脂胶。本品外观为无色透明液体,可根据客户需求定制颜色,通过波长不大于 395nm 的紫外光实现快速固化。
U901 is a polyimide (PI) bonding UV adhesive of the TADHE® brand, developed with modified acrylic UV resin for difficult-to-bond plastic substrates such as PI (polyimide) and PA (polyamide). It is a colorless transparent liquid, color-customizable on request, and cures rapidly under UV light with a wavelength not greater than 395 nm.
1.2 Product Positioning
U901 主要应用于 PI、PA 塑料材料粘接、FPC(柔性线路板)补强、芯片防水密封保护等电子加工场景,针对聚酰亚胺基材难粘、易脱胶、弯折易开裂等痛点,提供粘接牢固、柔韧耐弯折的可靠方案。
U901 is mainly applied in electronic processing scenarios such as bonding PI and PA plastics, FPC (flexible printed circuit) reinforcement, and chip waterproof sealing protection. It provides strong, flexible and bend-resistant reliable solutions for the pain points of polyimide substrates such as difficult adhesion, easy peeling, and easy cracking when bent.
2 Product Features
粘接力强:抗剥离性佳,玻璃粘金属粘接面积 3mm² 时仍具有可靠粘接表现;
Strong adhesion: excellent peel resistance, reliable bonding performance even at a bonding area of 3mm² for glass-to-metal.
坚韧抗冲击:胶体柔韧,可反复弯折不易开裂、不易脱胶;
Tough and impact-resistant: flexible adhesive, repeated bending without cracking or delamination.
耐候性好:耐水、耐高低温,可通过双 85(高温高湿)可靠性测试;
Excellent weatherability: water-resistant, resistant to high and low temperatures, and can pass the double-85 (high temperature & high humidity) reliability test.
快速固化:UV 照射即固化,缩短产线节拍;
Fast curing & good surface drying: cures quickly upon UV irradiation with a dry surface, shortening production takt time.
工艺适配佳:胶液稠度高、不拉丝,支持手动点胶与自动化点胶设备;
Excellent process adaptability: high viscosity and non-stringing, compatible with manual and automatic dispensing.
品质保障:透度高、耐久老化、环保无溶剂,支持定制有色胶液,便于产线质检识别。
Quality assurance: high transparency, durable aging resistance, solvent-free and eco-friendly, supports custom-colored adhesive for easy quality inspection.
3 Specifications
项目 / Item
参数 / Parameter
参数(英文)/ Parameter (EN)
品牌 / Brand
TADHE®
TADHE ®
型号 / Model
U901-x
U901-x
名称 / Name
PI 粘接胶
PI Bonding Adhesive
外观 / Appearance
无色透明液体
Colorless transparent liquid
规格 / Specification
30g、50g、1000g
30g, 50g, 1000g
主要成分 / Main Component
改性丙烯酸树脂
Modified acrylic resin
粘接基材 / Bonding Substrate
单面透光材料
Single-sided light-transmissive material
涂布方式 / Coating Method
手动、自动
Manual / Automatic
固化方式 / Curing Method
UV(紫外)光
UV (ultraviolet) light
粘度 / Viscosity
10000–12000 mPa·s
10000–12000 mPa·s
硬度 / Hardness
邵D 45
Shore D 45
保质期 / Shelf Life
10 个月
10 months
4 Applications
U901 广泛应用于电子加工与元器件防护领域,典型场景包括:
U901 is widely used in electronic processing and component protection fields. Typical applications include:
PI 膜芯片保护:对 FPC 上的芯片及周边电路进行防水密封保护;
PI film chip protection: waterproof sealing protection for chips and surrounding circuits on FPC.
柔性板 FPC 补强:在柔性线路板弯折部位、排线连接处进行补强加固;
FPC reinforcement: reinforcement at bending areas of flexible circuit boards and flat-cable connection points.
线材端子补强:对线材端子、排线焊点等部位进行粘接补强;
Wire terminal reinforcement: bonding reinforcement for wire terminals, flat-cable solder joints and similar areas.
PA 材料粘接:实现 PA 塑料件与透明材料、丝状结构之间的可靠粘接;
PA material bonding: reliable bonding between PA plastic parts and transparent materials or filamentary structures.
芯片防水密封保护:为敏感元器件提供绝缘、防水、防潮的密封保护。
Chip waterproof sealing protection: provides insulation, waterproof and moisture-proof sealing protection for sensitive components.
5 Instructions for Use
5.1 Recommended UV Curing Lamps
400W(11mW/cm²)UV 灯;
400W UV lamp (11 mW/cm²);
20W、波长不大于 395nm 的 UV 手电筒;
20W UV flashlight with wavelength not greater than 395 nm;
或其他能够满足固化要求的 UV 灯。
or other UV lamps that can meet the curing requirements.
5.2 Operation Steps
先把粘接面清洁干净,再缓慢滴入胶液,注意不要有气泡;
1. Clean the bonding surfaces thoroughly, then slowly apply the adhesive, being careful to avoid air bubbles;
使用 UV(紫外)光灯距离 10–30 厘米左右照射 15 秒左右固化(具体需根据实际使用的 UV 灯确定);
2. Cure by irradiating with the UV lamp at a distance of about 10–30 cm for about 15 seconds (adjust according to the UV lamp actually used);
如胶层较厚,需适当增加 UV 照射强度或时间;
3. If the adhesive layer is thicker, appropriately increase the UV irradiation intensity or time;
未使用的胶水密封放置于常温避光处保存。
4. Store unused adhesive in a sealed container at room temperature, away from light.
5.3 Precautions
每次固化树脂层厚度要小于 1mm;胶层较厚时应分层照射固化,以确保固化完全。
Each cured resin layer must be less than 1 mm thick; for thicker layers, cure in multiple passes to ensure complete curing.
6 Packaging Specifications
U901 提供多种包装规格,适配不同用量需求:
U901 is available in multiple packaging specifications to suit different usage needs:
30g 针筒装;
30g syringe;
50g 针筒装;
50g syringe;
1000g 瓶装。
1000g bottle.
7 Storage & Precautions
保存条件:密封、常温、避光保存;
Storage conditions: keep sealed, at room temperature, away from light;
未使用的胶水应密封放置于常温避光处,避免紫外光照射;
Unused adhesive should be kept sealed at room temperature away from light, avoiding UV irradiation;
按包装标示的有效期使用,保质期一般为 10 个月。
Use within the validity period marked on the package; the shelf life is generally 10 months.
8 Company Information
深圳市泰达克电子材料有限公司
SHENZHEN TADHE MATERIALS CO.,LTD
官方网站:www.taidake.com
Official Website: www.taidake.com
特别声明:以上内容(如有图片或视频亦包括在内)为自媒体平台“网易号”用户上传并发布,本平台仅提供信息存储服务。
Notice: The content above (including the pictures and videos if any) is uploaded and posted by a user of NetEase Hao, which is a social media platform and only provides information storage services.