CJME2024年4期目录

Review

⭐ 封面文章 ⭐

1.Review on Lithium-ion Battery PHM from the Perspective of Key PHM Steps

从PHM的关键步骤看锂离子电池PHM研究进展

作者：

Jinzhen Kong, Jie Liu, Jingzhe Zhu, Xi Zhang, Kwok-Leung Tsui, Zhike Peng & Dong Wang

引用：

Kong, J., Liu, J., Zhu, J. et al. Review on Lithium-ion Battery PHM from the Perspective of Key PHM Steps. Chin. J. Mech. Eng. 37, 71 (2024). https://doi.org/10.1186/s10033-024-01055-z

2.Review on the Fabrication of Surface Functional Structures for Enhancing Bioactivity of Titanium and Titanium Alloy Implants

钛及钛合金植入体表面功能结构制造研究进展

作者：

Heng Tang, Jiaxiang Xu, Bin Guo, Yansong Xie, Yalong Sun, Yanjun Lu and Yong Tang

引用：

Tang, H., Xu, J., Guo, B. et al. Review on the Fabrication of Surface Functional Structures for Enhancing Bioactivity of Titanium and Titanium Alloy Implants. Chin. J. Mech. Eng. 37, 87 (2024). https://doi.org/10.1186/s10033-024-01064-y

3.Assistive Robotics for Upper Limb Physical Rehabilitation: A Systematic Review and Future Prospects

用于上肢物理康复的辅助机器人：系统回顾和未来展望

作者：

Andrés Guatibonza, Leonardo Solaque, Alexandra Velasco and Lina Peñuela

引用：

Guatibonza, A., Solaque, L., Velasco, A. et al. Assistive Robotics for Upper Limb Physical Rehabilitation: A Systematic Review and Future Prospects. Chin. J. Mech. Eng. 37, 69 (2024). https://doi.org/10.1186/s10033-024-01056-y

Intelligent Manufacturing Technology

4.Novel Batch Polishing Method of Ceramic Cutting Inserts for Reducing Tool Wear

陶瓷刀具批量化抛光方法及其耐磨特性研究

作者：

Rui Gao, Chunjin Wang, Yee Man Loh, Xiaoliang Liang, Chen Jiang and Chi Fai Cheung

引用：

Gao, R., Wang, C., Loh, Y.M. et al. Novel Batch Polishing Method of Ceramic Cutting Inserts for Reducing Tool Wear. Chin. J. Mech. Eng. 37, 83 (2024). https://doi.org/10.1186/s10033-024-01069-7

5.Path-Dependent Progressive Failure Analysis for 3D-Printed Continuous Carbon Fibre Reinforced Composites

面向3D打印连续碳纤维增强复合材料的路径相关渐进损伤失效分析

作者：

Yuan Chen and Lin Ye

引用：

Chen, Y., Ye, L. Path-Dependent Progressive Failure Analysis for 3D-Printed Continuous Carbon Fibre Reinforced Composites. Chin. J. Mech. Eng. 37, 72 (2024). https://doi.org/10.1186/s10033-024-01054-0

6.Switching Frequency Improvement of a High Speed on/off Valve Based on Pre-excitation Control Algorithm

基于预激励控制算法的高速开关阀启闭频率优化

作者：

Qi Zhong, Xiaotian Li, Yongxin Mao, Enguang Xu, Tiwei Jia, Yanbiao Li and Huayong Yang

引用：

Zhong, Q., Li, X., Mao, Y. et al. Switching Frequency Improvement of a High Speed on/off Valve Based on Pre-excitation Control Algorithm. Chin. J. Mech. Eng. 37, 88 (2024). https://doi.org/10.1186/s10033-024-01072-y

7.Multi-Objective Optimization of the Ultrasonic Scalpel Rod and Tip with Improved Performance: Vibration Frequency, Amplitude, and Service Life

超声手术刀的多目标优化: 振动频率、输出幅值与服役寿命

作者：

Jiaqi Zhao, Yuhao Zhai, Xuzhe Jia, Naiwen Deng, Kunxu Li, Guangchao Han, Rong Chen, Dong Wang and Wei Bai

引用：

Zhao, J., Zhai, Y., Jia, X. et al. Multi-Objective Optimization of the Ultrasonic Scalpel Rod and Tip with Improved Performance: Vibration Frequency, Amplitude, and Service Life. Chin. J. Mech. Eng. 37, 84 (2024). https://doi.org/10.1186/s10033-024-01071-z

8.Vibration Reduction by a Partitioned Dynamic Vibration Absorber with Acoustic Black Hole Features

具有声学黑洞特征的分区动态吸振器的抑振

作者：

Xiaoning Zhao, Chaoyan Wang, Hongli Ji, Jinhao Qiu and Li Cheng

引用：

Zhao, X., Wang, C., Ji, H. et al. Vibration Reduction by a Partitioned Dynamic Vibration Absorber with Acoustic Black Hole Features. Chin. J. Mech. Eng. 37, 75 (2024). https://doi.org/10.1186/s10033-024-01049-x

9.Adaptive RISE Control of Winding Tension with Active Disturbance Rejection

基于自适应积分鲁棒的缠绕过程张力自抗扰控制

作者：

Junjie Mi, Jianyong Yao and Wenxiang Deng

引用：

Mi, J., Yao, J. & Deng, W. Adaptive RISE Control of Winding Tension with Active Disturbance Rejection. Chin. J. Mech. Eng. 37, 52 (2024). https://doi.org/10.1186/s10033-024-01030-8

10.Dynamic Resistance and Energy Absorption of Sandwich Beam via a Micro-Topology Optimization

基于微观拓扑优化的夹芯梁动态响应和能量吸收

作者：

Shiqiang Li, Yuwei Li, Xiaomin Ma, Jianguang Fang, Zhifang Liu and Zhihua Wang

引用：

Li, S., Li, Y., Ma, X. et al. Dynamic Resistance and Energy Absorption of Sandwich Beam via a Micro-Topology Optimization. Chin. J. Mech. Eng. 37, 92 (2024). https://doi.org/10.1186/s10033-024-01051-3

11.Deployment Dynamic Modeling and Driving Schemes for a Ring-Truss Deployable Antenna

环形天线展开动力学建模与驱动方案研究

作者：

Baiyan He, Lijun Jia, Kangkang Li, Rui Nie, Yesen Fan and Guobiao Wang

引用：

He, B., Jia, L., Li, K. et al. Deployment Dynamic Modeling and Driving Schemes for a Ring-Truss Deployable Antenna. Chin. J. Mech. Eng. 37, 79 (2024). https://doi.org/10.1186/s10033-024-01065-x

12.Prediction of Coefficient of Restitution for Impact Elastoplastic Spheres Considering Finite Plate Thickness

考虑有限板厚的冲击弹性球的恢复系数预测

作者：

Yunfeng Fan, Hao Wang, Tao Zhou, Limin Zou, Zhinong Jiang and Minghui Hu

引用：

Fan, Y., Wang, H., Zhou, T. et al. Prediction of Coefficient of Restitution for Impact Elastoplastic Spheres Considering Finite Plate Thickness. Chin. J. Mech. Eng. 37, 91 (2024). https://doi.org/10.1186/s10033-024-01066-w

13.DSN-BR-Based Online Inspection Method and Application for Surface Defects of Pharmaceutical Products in Aluminum-Plastic Blister Packages

基于DSN-BR的铝塑泡罩包装药品表面缺陷在线检测方法及应用

作者：

Mingzhou Liu, Yu Gong, Xiaoqiao Wang, Conghu Liu and Jing Hu

引用：

Liu, M., Gong, Y., Wang, X. et al. DSN-BR-Based Online Inspection Method and Application for Surface Defects of Pharmaceutical Products in Aluminum-Plastic Blister Packages. Chin. J. Mech. Eng. 37, 86 (2024). https://doi.org/10.1186/s10033-024-01068-8

14.Intelligent Diagnosis Method for Typical Co-frequency Vibration Faults of Rotating Machinery Based on SAE and Ensembled ResNet-SVM

基于SAE和集成ResNet-SVM的旋转机械典型共频振动故障智能诊断方法

作者：

Xiancheng Zhang, Xin Pan, Hao Zeng and Haofu Zhou

引用：

Zhang, X., Pan, X., Zeng, H. et al. Intelligent Diagnosis Method for Typical Co-frequency Vibration Faults of Rotating Machinery Based on SAE and Ensembled ResNet-SVM. Chin. J. Mech. Eng. 37, 64 (2024). https://doi.org/10.1186/s10033-024-01046-0

15.Effect of Ellipsoidal Particle Shape on Tribological Properties of Lubricants Containing Nanoparticles

椭球状颗粒形状对含纳米颗粒润滑剂摩擦学性能的影响

作者：

Ling Pan, Zhi Li, Yunhui Chen and Guobin Lin

引用：

Pan, L., Li, Z., Chen, Y. et al. Effect of Ellipsoidal Particle Shape on Tribological Properties of Lubricants Containing Nanoparticles. Chin. J. Mech. Eng. 37, 80 (2024). https://doi.org/10.1186/s10033-024-01062-0

Mechanism and Robotics

16.Dynamics Modeling and Parameter Identification for a Coupled-Drive Dual-Arm Nursing Robot

耦合驱动双臂护理机器人动力学建模与参数辨识

作者：

Hao Lu, Zhiqiang Yang, Deliang Zhu, Fei Deng and Shijie Guo

引用：

Lu, H., Yang, Z., Zhu, D. et al. Dynamics Modeling and Parameter Identification for a Coupled-Drive Dual-Arm Nursing Robot. Chin. J. Mech. Eng. 37, 74 (2024). https://doi.org/10.1186/s10033-024-01063-z

17.Systematic Elastostatic Stiffness Model of Over-Constrained Parallel Manipulators Without Additional Constraint Equations

过约束并联机器人无需附加约束方程的系统的静弹性刚度模型

作者：

Chao Yang, Wenyong Yu, Wei Ye, Qiaohong Chen and Fengli Huang

引用：

Yang, C., Yu, W., Ye, W. et al. Systematic Elastostatic Stiffness Model of Over-Constrained Parallel Manipulators Without Additional Constraint Equations. Chin. J. Mech. Eng. 37, 89 (2024). https://doi.org/10.1186/s10033-024-01060-2

Advanced Transportation Equipment

18.Numerical Prediction of Ride Comfort of Tracked Vehicle Equipped with Novel Flexible Road Wheels

复合式柔性负重轮履带车辆平顺性数值预测

作者：

Yaoji Deng, Zhiyue Wang, Youqun Zhao, Junjie Gong, Hui Shen and Fen Lin

引用：

Deng, Y., Wang, Z., Zhao, Y. et al. Numerical Prediction of Ride Comfort of Tracked Vehicle Equipped with Novel Flexible Road Wheels. Chin. J. Mech. Eng. 37, 85 (2024). https://doi.org/10.1186/s10033-024-01070-0

19.Remaining Useful Life for Heavy-Duty Railway Cast Steel Knuckles Based on Crack Growth Behavior with Hypothetical Distributions

基于假设分布裂纹扩展行为的重载铁路铸钢钩舌剩余使用寿命

作者：

Chao Wang, Tao Zhu, Bing Yang, Shoune Xiao and Guangwu Yang

引用：

Wang, C., Zhu, T., Yang, B. et al. Remaining Useful Life for Heavy-Duty Railway Cast Steel Knuckles Based on Crack Growth Behavior with Hypothetical Distributions. Chin. J. Mech. Eng. 37, 77 (2024). https://doi.org/10.1186/s10033-024-01052-2

Smart Materials

20.Failure Analysis of Dissimilar Metal Welds between Ferritic Heat Resistant Steels and Austenitic Stainless Steels in Power Plant

电站用铁素体基热强钢/奥氏体不锈钢异种金属焊接接头失效分析

作者：

Xiaogang Li, Junfeng Nie, Xin Wang, Kejian Li and Haiquan Zhang

引用：

Li, X., Nie, J., Wang, X. et al. Failure Analysis of Dissimilar Metal Welds between Ferritic Heat Resistant Steels and Austenitic Stainless Steels in Power Plant. Chin. J. Mech. Eng. 37, 76 (2024). https://doi.org/10.1186/s10033-024-01067-9

21.Closure Effect of I + II Mixed-mode Crack for EA4T Axle Steel

EA4T车轴钢混合模式I + II型裂纹闭合效应

作者：

Shuancheng Wang, Bing Yang, Shuwei Zhou, Jian Li and Shoune Xiao

引用：

Wang, S., Yang, B., Zhou, S. et al. Closure Effect of I + II Mixed-mode Crack for EA4T Axle Steel. Chin. J. Mech. Eng. 37, 81 (2024). https://doi.org/10.1186/s10033-024-01061-1

22.Lap-Shear Performance of Weld-Bonded Mg Alloy and Austenitic Stainless Steel in Three-Sheet Stack-Up

镁合金与奥氏体不锈钢三层堆焊搭接剪切性能研究

作者：

Sunusi Marwana Manladan, Mukhtar Fatihu Hamza, Singh Ramesh and Zhen Luo

引用：

Manladan, S.M., Hamza, M.F., Ramesh, S. et al. Lap-Shear Performance of Weld-Bonded Mg Alloy and Austenitic Stainless Steel in Three-Sheet Stack-Up. Chin. J. Mech. Eng. 37, 70 (2024). https://doi.org/10.1186/s10033-024-01057-x

责任编辑：谢雅洁

责任校对：向映姣

审 核：张 强

JME学院简介

JME学院是由《机械工程学报》编辑部2018年创建，以关注、陪伴青年学者成长为宗旨，努力探索学术传播服务新模式。

欢迎各位老师扫码添加小助理-暖暖为好友，由小助理拉入JME学院官方群！

欢迎关注JME学院视频号~

寻觅合作伙伴

有一种合作叫做真诚，有一种发展可以无限，有一种伙伴可以互利共赢，愿我们合作起来流连忘返，发展起来前景可观。关于论文推荐、团队介绍、图书出版、学术直播、招聘信息、会议推广等，请与我们联系。

感谢关注我们！我们《机械工程学报》编辑部将努力为您打造一个有态度、有深度、有温度的学术媒体！

版权声明：

本文为《机械工程学报》编辑部原创内容，欢迎转载，请联系授权！

在公众号后台留言需要转载的文章题目及要转载的公众号ID以获取授权!

微信投稿、转载等：

联系人：暖暖

电话：010-88379909

E-mail：jme@cmes.org

网 址：http://www.cjmenet.com.cn

官方微信号：jmewechat